Product SKUs | Chassis | |
SYS-2029U-E1CR4 | SuperServer 2029U-E1CR4 (Black) | Form Factor | 2U Rackmount | |
| | Model | CSE-219U2TS-R1K02P-T | |
Motherboard | | | |
| Dimensions and Weight | |
Super X11DPU | | |
| | Width | 17.2" (437mm) | |
Processor | Height | 3.5" (89mm) | |
| Depth | 27.76" (705.3mm) | |
CPU | Dual Socket P (LGA 3647) | Weight | Net Weight: 36 lbs (16.4 kg) | |
2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable
Processors‡, | Gross Weight: 72 lbs (32.7 kg) | |
Dual UPI up to 10.4GT/s | Available Colors | Black | |
Support CPU TDP 70-205W | | | |
Cores | Up to 28 Cores | Front Panel | |
Note | ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel®
Xeon® Scalable processors (codenamed Cascade Lake-R) | | |
| | Buttons | Power On/Off button | |
System Memory | System Reset button | |
| LEDs | Power status LED | |
Memory Capacity | 24 DIMM slots | HDD activity LED | |
Up to 6TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM | Network activity LEDs | |
Supports Intel® Optane™ DCPMM†† | System information (overheat/UID) LED | |
Memory Type | 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM | | | |
2666 ECC DDR4 NVDIMM | Expansion Slots | |
Note | † 2933MHz in two DIMMs per channel can be achieved by using memory
purchased from Supermicro | | |
†† Cascade Lake only. Contact your Supermicro sales rep for more
info. | PCI-Express | 1 PCI-E 3.0 x16 (FH, 10.5" L) | |
| | 5 PCI-E 3.0 x8 (FH, 10.5" L) | |
On-Board Devices | 1 PCI-E 3.0 x8 (LP) | |
| 1 PCI-E 3.0 x8 (internal LP) | |
Chipset | Intel® C621 chipset | | |
SAS | SAS3 (12Gbps) via expander + Broadcom 3108/3008 AOC | | |
Network Connectivity | 4x 1GbE LAN ports via Intel® i350 (AOC-2UR68-i4G) | (Both CPUs need to be installed for full access to PCI-E slots and
onboard controllers. See manual block diagram and AOC Support
for details.) | |
IPMI | Support for Intelligent Platform Management Interface v.2.0 | | | |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | Drive Bays / Storage | |
Graphics | ASPEED AST2500 BMC | | |
| | Hot-swap | 24 Hot-swap 2.5" drive bays: | |
Input / Output | 24 SAS3 via opt. AOC | |
| (4 hybrid ports - opt. 4 NVMe) | |
SAS | 24 SAS3 ports support via expander and storage Add-on Cards | | |
LAN | 4 RJ45 1GbE LAN ports | | |
1 RJ45 Dedicated IPMI LAN port | Note: Storage Add-on card is required | |
USB | 3 USB 3.0 ports | M.2 | 1 M.2 PCI-E 3.0 x4 M-Key NVMe or 1 M.2 M-Key SATA3
(2240/2260/2280/22110) via optional riser card (see optional parts
list) | |
(2 rear, 1 Type A) | 2 M.2 PCI-E 3.0 x4 M-Key NVMe (2260/2280/22110) via optional add-on
card AOC-SLG3-2M2 | |
Video | 1 VGA Connector | | | |
Serial Header | 1 Serial header | System Cooling | |
DOM | 2 SuperDOM (Disk on Module) ports | | |
| | Fans | 4 heavy duty 8cm PWM fans | |
System BIOS | Shroud | 1 Air Shroud | |
| | | |
BIOS Type | AMI 32Mb SPI Flash ROM | Power Supply | |
| | 1000W Redundant Power Supplies with PMBus | |
Management | Total Output Power | 800W: 100 – 127Vac | |
| 1000W: 200 – 240Vac | |
Software | Intel® Node Manager | 1000W: 200 – 240Vdc (for CCC only) | |
Redfish API | Dimension | 73.5 x 40 x 203 mm | |
IPMI 2.0 | (W x H x L) | |
KVM with dedicated LAN | Input | 100-127Vac / 9.8 - 7A / 50-60Hz | |
NMI | 200-240Vac / 7 - 5A / 50-60Hz | |
SSM, SPM, SUM | 200-240Vdc / 7 - 5A (for CCC only) | |
SuperDoctor® 5 | +12V | Max: 66.7A / Min: 0A (100-127Vac) | |
Power Configurations | ACPI Power Management | Max: 83A / Min: 0A (200-240Vac) | |
| | Max: 83A / Min: 0A (200-240Vdc) | |
PC Health Monitoring | 12Vsb | Max: 2.1A / Min: 0A | |
| Output Type | 25 Pairs Gold Finger Connector | |
CPU | Monitors for CPU Cores, Chipset Voltages, Memory. | Certification | Titanium Level | |
4+1 Phase-switching voltage regulator | | |
FAN | Fans with tachometer monitoring | [ Test Report ] | |
Status monitor for speed control | | | |
Pulse Width Modulated (PWM) fan connectors | Operating Environment |
Temperature | Monitoring for CPU and chassis environment | | |
Thermal Control for fan connectors | RoHS | RoHS Compliant | |
| | Environmental Spec. | Operating Temperature: | |
| | 10°C ~ 35°C (50°F ~ 95°F) | |
| | Non-operating Temperature: | |
| | -40°C to 70°C (-40°F to 158°F) | |
| | Operating Relative Humidity: | |
| | 8% to 90% (non-condensing) | |
| | Non-operating Relative Humidity: | |
| | 5% to 95% (non-condensing) | |
